glenair, inc. 1211 air way glendale, ca 91201-2497 818-247-6000 fax 818-500-9912 ? 2003 glenair, inc. printed in u.s.a. cage codes 06324 d-32 series 74 convoluted tubing e-mail: sales@glenair.com www.glenair.com product series connector designator (a, f, h & u) angular function s - straight t = 45 elbow w = 90 elbow basic no. finish (table iii) shell size (table i) (see note 1) dash no. (table ii) tubing option (see note 2) k = peek (omit for pfa, etfe, fep, or ptfe) to accommodate emi or dacron overbraid (omit if not required) length in 1/4 inch increments (20 = 4 in.) omit for standard 1.25 in. length metric dimensions (mm) are in parentheses and are for reference only. notes: 1. convoluted tubing size, tubing to be ordered seperately (see series 74 catalog, type a tubing section, standard pitch). dash 1 configuration accommodates type b or d tubing. 2. different adapters are necessary to terminate peek tubing. nominal i.d. reduced by approximately .060 (use suffix p) in p/n development. 712 f t 419 xm 19 12- 20 k- 1 a thread typ. (see note 1) 1.250 (31.8) tubing shown for reference only (see note1) j typ tubing i.d. (see note 2) knurl or flute style manufacurer's option, typ. c g e h f dash 1 configuration emi or dacron over braid (see p/n development) raised configuration (mfr's option) sym s ? straight sym w 90 sym t 45 anti- decoupling device table i e +.06 (1.5) .720 (18.3) .750 (19.1) .750 (19.1) .760 (19.3) .780 (19.8) .790 (20.1) .820 (20.8) .860 (21.8) .890 (22.6) .920 (23.4) tubing size max. 09 12 16 20 24 28 32 32 40 40 shell size a,f & h g & u 08, 09 03, 10, 11 12, 13 14, 15 16, 17 18, 19 20, 21 22, 23 24, 25, 61 28 ? 08 10, 11 12, 13 14, 15 16, 17 18, 19 20 22, 23 24, 25 f +.09 (2.3) .890 (22.6) .950 (24.1) 1.020 (25.9) 1.050 (26.7) 1.070 (27.2) 1.080 (27.4) 1.110 (28.2) 1.150 (29.2) 1.180 (30.0) 1.210 (30.7) g +.06 (1.5) .690 (17.5) .750 (19.1) .810 (20.6) .880 (22.4) .940 (23.9) .970 (24.6) 1.060 (26.9) 1.130 (28.7) 1.190 (30.2) 1.340 (34.0) h +.09 (2.3) 1.110 (28.2) 1.160 (29.5) 1.220 (31.0) 1.290 (32.8) 1.350 (34.3) 1.380 (35.1) 1.470 (37.3) 1.540 (39.1) 1.730 (43.9) 1.820 (46.2) table 2 xm electroless nickel xw cadmium olive drab over electroless nickel xb no plating - black material xo no plating - base material non-conductive table iii j dia max .790 (20.1) .985 (25.0) .985 (25.0) 1.035 (26.3) 1.100 (27.9) 1.160 (29.5) 1.285 (32.6) 1.480 (37.6) 1.670 (42.4) 1.720 (43.7) 2.100 (53.3) 2.420 (61.5) dash no. 06 09 10 12 14 16 20 24 28 32 40 48 conduit i.d. .188 (4.8) .281 (7.1) .312 (7.9) .375 (9.5) .437 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) table ii 712-419 self-locking composite conduit adapter for series 74 peek, pfa, etfe, fep or ptfe tubing shielding optional
|
